Standard Evaporators
Standard Evaporators refer to a type of heat exchanger used in refrigeration systems to facilitate the evaporation of the refrigerant. The needs of commercial refrigeration can be met by our cold room evaporators, which can offer small and intermediate ranges of cooling capabilities. These evaporators are crafted with precision and reliability in mind, making them an ideal choice for a wide range of cooling applications.
- Environmentally Friendly
- Certified Products
- Energy Saving
- Does not contain carcinogenic material
- Can be used in health and food sector
Visit ORCA for more information about
Split Refrigeration Units.
General Specifications
They contain a wide capacity range from 0,6 kW to 87 kW. (These capacity ranges are given for R404A refrigerant type.)
- High efficient aliminium fins
- 4-6-8-10 mm fin spacings
- The copper tubes in 3/8’’-1/2’’-5/8’’ in diameters
- Working capability with 404A, R 507A ve R 134A gases
- High pressured test in 35 bar
- High operating pressure till to 20 bar
- Sending by positive pressure pressing with nitrogen
Technical Specifications
Characteristics Of Casing:
- Hot-dip galvanized sheet
- Anti-rust and permanent electrostatic powder paint (RAL 7047)
- Hinged drain tray,
- Easily removed side covers by loosening the connection screw
- Ceiling mounting brackets
Characteristics Of Heaters:
E1 type heating resistor is used for 0°C and +5°C room temperature range. The resistors are only mounted on the cooling coil.
E2 type heating resistor is used for lower than 0°C room temperature. The resistors are mounted on the coil and on the drain tray.
Optional water defrost (WD) can be made.
- E1: Coil electrical defrost onlyt
- E2: Coil + drain tray electrical defrost
- E3: Coil + drain tray + electric fan defrost
Characteristics Of Fans:
- Energy-efficient and silent running fans
- The fan motors are equipped with insulation class B or F, protection class IP44 or IP54
Fan Diameter (mm) | Fan Speed (fs/min) | Phase / Voltage (V) / Frequency (Hz) | Recommended Max. Operating Temperature (°C) |
| 300 | 1320 | 1 / 230 / 50 | -25 / +60 |
| 350 | 1340 | 1 / 230 / 50 | -25 / +65 |
| 400 | 1380 | 1 / 230 / 50 | -25 / +40 |
| 450 | 1345 | 1 / 230 / 50 | -25 / +60 |
| 500 | 1270 | 1 / 230 / 50 | -25 / +65 |
| 630 | 860 | 1 / 230 / 50 | -25 / +55 |
