Cold Room Single Wing Service Door
Our Cold Room Single Wing Service Door is expertly designed to provide seamless access to cold storage spaces.
With its single-wing configuration, the door opens smoothly on one side, allowing for easy entry and exit.
This design ensures efficient movement of personnel, equipment, and goods in and out of the cold storage area, promoting productivity and convenience.
- Environmentally Friendly
- Certified Products
- Energy Saving
- Does not contain carcinogenic material
- Can be used in health and food sector
Examine the Product in Detail
Used for fast transposition between storage areas.
The door is produced with single wing and it can be mounted to the panel or wall.
Thickness of wing is 1.57 inches and it can be opened 180 degrees in two apposite directions and can always stay be opened if required.
Anodized aluminium door frame can be applied onto panel or Wall. Our Access doors that have 1.57 inches leaf thickness have been fabricated by injecting 42 density polyurethane between Ral 9002 painted sheet metal and Cr-Ni, PVC coating two sheet metal.
Hinges on our doors that are produces by glassed-in and glassless are bi-directional and they provide to open on both side. Our special sealed door minimise the heat abductions in area transitions. There are polyurethane handle and Cr-Ni toe board against shocks. They can be fabricated as single leaf or double leaf according to project.
| Door Frame : | PVC-Aluminum |
| Frame Specifications : | Anodized Aluminum |
| Door Insulation Level : | 2,624 – 2,811 lb/ft³ |
| Surface Materials Types : | Polyester-PVC-CrNi |
| Color : | RAL 9002 |
| Pattern : | Flat |
| Insulation : | Poliurethane |
| Sheet Thickness (mm) : | Interior 0.0197 inches Exterior 0.0197 inches |
